How To Attach Electric Winch Cables To A Battery

Filed under: Cabling — @ 2:22 am, March 15, 2018.

How to Attach Electric Winch Cables to a Battery

by

ann00123

Installing a electric winch on a Jeep or four-wheel-drive truck can be challenging, but wiring the electric winch is simple. If you pay attention to a few small items as you run your wires, you will have very little problem getting the electric winch running. When installing a electric winch, remember that the battery needs to be designed to handle the constant loading and heavy draw of the electric winch. There are several batteries rated for this purpose that will last longer and be more dependable than the OEM battery in your truck.

Instructions:

Step 1. Survey the area under the hood and decide on a route for the cables. The cables need to run through the engine compartment and through the grill on most applications.

[youtube]http://www.youtube.com/watch?v=KulqAHJ16UQ[/youtube]

Step 2. Route the cables through the grill of the truck and into the engine compartment. Make sure your cables are not resting against any sharp edges that might cut the cables or insulation, causing a short.

Step 3. Run the positive cable to the positive battery terminal. The negative cable can run to the battery negative terminal or can be attached to a ground on the frame or chassis of the truck.

Step 4. Remove the bolt holding the positive connector onto the battery terminal and slide it through the ring connector on the positive wire to the electric winch. Reinsert the bolt through the terminal and attach the nut.

Step 5. Remove the bolt holding the negative connector on the negative terminal on the battery and again slide it through the ring connector on the negative cable to the electric winch. Reattach the terminal and attach the nut.

Step 6. Trace the route of your electric winch cables and be sure that they are not touching anything that will get hot, sharp edges that would cut them, or moving parts that they could be tangled in. Use cable ties or zip ties to secure the cables to prevent them from moving and getting damaged.

Haisen Motor Tool Factory

electric winch

with high efficiency, low amp draw, sealed motors keep you off the road, our

electric winch

products are popular all over the world with high quality, competitive price, fast delivery and efficient service.

Article Source:

ArticleRich.com

Comments are closed.